|
The Juice module is an add-on Engine Control Module for the Cummins engine that offers additional features not available with the factory setup. Since it is an add-on ECM, it uses all the factory data and then enhances the factory settings to optimize your truck's performance.
The Juice features engine temperature monitoring and power increases from the Juice module as the engine reaches operating temperature. With three selectable power levels via an in-cab position switch, the Juice module offers a large power increase over stock throughout the RPR range, but the power is more noticeable in the midrange RPMs. This greatly improves driveability and towing performance. Transmission downshifting is greatly reduced, especially while passing or towing.
The Juice also regulates power delivery and timing based on engine temperature. This means that while the engine temperature is below 140 degrees Fahrenheit, no additional fueling or timing is delivered. Once engine temperatures reach 140 degrees, the module begins delivering fuel at 25% of the calculated additional fuel, and the percentage increases, until at full engine temperature the Juice delivers 100% of the calculated additional fuel. At full engine temperature the Juice also modifies timing.
The Juice alone provides the following power gains with toggle switch:
- Level 1: 25 Horsepower - 70 Foot Pounds of Torque
- Level 2: 40 Horsepower - 90 Foot Pounds of Torque
- Level 3: 65 Horsepower - 160 Foot Pounds of Torque
When the Juice module is used without an Attitude or A2 monitor the Juice will NOT read EGTs.
Note: The Juice with Attitude for the 6.7L Dodge Cummins is designed specifically for a standard truck platform and does not work on the chassis cab version.
|
)
